Hangzhou Microcontrol Energy Saving Technology Co., Ltd. With the depletion of energy and the deterioration of the environment, the development and utilization of high-efficiency and clean new energy will become an important choice for energy development in the 21st century. Solid oxide fuel cell (SOFC) is a kind of direct conversion of chemical energy in …
نظام الإدارة الحرارية SOFC حل مبادل حراري عالي الحرارة قراءة المزيد »
Under the national “dual carbon” goal, the proportion of domestic clean energy consumption has been expanding, and related industries have paid more and more attention to the development and utilization of clean energy. With the rapid development of the hydrogen energy industry, the use of medium such as carbon dioxide and high-temperature gas-cooled reactors in …
The critical point of carbon dioxide is 7.38MPa at 31°C, and the carbon dioxide at this time is in a state of neither gas nor liquid. Supercritical carbon dioxide has special properties: low viscosity, high density, strong swelling and diffusion capacity for polymers, safe, non-flammable and explosive, non-toxic and non-corrosive. The special properties of supercritical …
With the development of modern aerospace power systems towards high thrust ratio and high flight Mach number, the thermal load on the engine increases sharply. In order to guarantee the reliability and longevity of the engine, the development of rapid active cooling technology is crucial. The microchannel heat exchanger is considered to be an ideal …
Hydrogen:Hydrogen is an energy carrier, not an energy source, and can transport or store large amounts of energy. Hydrogen can be used in fuel cells to generate electricity, generate electricity or provide heat. Hydrogen is a clean secondary energy carrier, which can be easily converted into electricity and heat with high conversion efficiency and has …
(Five advantages of microreactor due to its characteristics:) A small amount of reagents reduces the costWhen the microreactor is used for the inspection of material properties or the study of chemical processes, very few reagents can be realized. This significantly reduces the cost, and at the same time, more accurate physical and chemical properties can …
Micro-chemical technology usually includes systems such as micro-heat exchange, micro-reaction, micro-separation and micro-analysis, of which the first two are more important. Micro-chemical technology starts from the source of chemical preparation process and equipment, and takes advantage of the strong improvement in mixing (mass transfer) and heat transfer of micro-channel reactors, as well as the advantages …
In the early 1990s, the research on micro-chemical technology started abroad. The United States, Germany, Britain, France, Japan and other developed countries have successively carried out research on microchemical engineering and technology. According to incomplete statistics, there are currently more than 50 suppliers of micro-chemical technology and equipment in the world, of which Europe accounts …
الوضع الراهن لصناعة المفاعلات الدقيقة في الداخل والخارج قراءة المزيد »
In today’s modern industry, electrical thermal management is much more than that. In addition to keeping electrical enclosures cool, thermal management is critical to many other important processes. As thermal management plays an increasingly important role, it becomes even more important for companies to find and implement more simplified solutions to this problem. In many …
أهمية المبادلات الحرارية لتحسين كفاءة الإنتاج بشكل فعال قراءة المزيد »
The core of microchemical technology is the microchannel reactor. Compared with traditional chemical processes, the most important thing in micro-chemical technology is to research and develop reactors and rapid reaction process conditions suitable for micro-reaction systems. Applicable direction of micro-reaction process: (research shows that if a reaction process has the following characteristics, then micro-reactor technology …
PCHE is suitable for power generation cycle system under high temperature and high pressure For supercritical CO2 power generation systems: The heat exchange of the current supercritical carbon dioxide test loop mostly uses a printed circuit board heat exchanger (PCHE), which is suitable for high working temperature and high working pressure, and has good expansion …
A microreactor is a three-dimensional structural element that can be used to carry out chemical reactions and is manufactured in a solid matrix by means of special microfabrication techniques. Microreactors typically contain small channel dimensions (less than 500 µm equivalent diameter) and channel diversity in which fluids flow and in which desired reactions are required …
ما هي القيود الحالية للمفاعلات متناهية الصغر؟ قراءة المزيد »
EN 
ZH 
RU 
ES 
DE 
FR 
AR 
TR 
PT 